Buying Monty: How we bought our RV
Updated: May 28, 2019
After coming up with an itinerary, we set about finding an RV for our trip. We had no previous experience with RVs at all. My family camped in a pop-up trailer when I was a kid, and we have a couple friends that rented motor homes for family vacations, but we were starting at square one. I started my research the usual way: Google. I quickly learned about the different classes of motor homes: A, B, and C. For the uninitiated, Class A motor homes are the huge motor coaches. They often have slide-outs to expand the interior space when at a campsite, they have full-sized beds and kitchens, and more living space than your average one-bedroom apartment. Class C is what most people probably envision when they hear "Winnebago". They're built on a large pickup or van chassis where only the cab is recognizable. They almost always have a sleeping area that extends over the top of the cab, and have a boxy frame. They can have slide-outs, and have the biggest range of sizes. The largest Class C's can rival Class A RVs in size, but you can find them as small as 22' or so. Finally there is Class B, which isn't between the other two as you might think, it's the smallest of them. Class B RVs are your "camper van", where an actual van is used to build out an RV inside of. The roof may be extended, but the frame of the van is otherwise recognizable. Class B's have a narrow range in sizes, the shortest being around 18' and the longest around 25'.
It was pretty clear for our needs that we we'd be looking for a Class B, so the next two questions were whether we should look at a rental or purchasing used or new. Given that we had no idea whether we'd want to take any subsequent RV trips, a rental seemed appropriate, but I quickly discovered that there weren't many options for renting Class B RVs, as larger Class Cs were far more common, and more importantly, when I computed the cost for our dates and the miles we were planning on putting in, the cost was significant. As in over $20,000. A little research into prices of new and used RVs and resale values showed that if we were to buy one and sell it after our trip, we'd probably lose less than $20k in depreciation, and we'd be able to be pickier about finding just the right RV for us. So we decided to buy.
Next step was to discover what our options were for Class B RVs. Darcey and I visited Poulsbo RV in Everett to get our first idea of what some of our options would be, and just verify that this seemed like the kind of thing we could imagine driving around the country. Ethan there was super helpful in showing us a couple different models and educating us about the various systems in an RV. We didn't drive anything yet, it was just a first exploratory visit. I then started filling out another Smartsheet with all of the relevant details of the different makes and models in the segment. Given our intention of spending most nights in hotels, visiting several large cities, and putting in a lot of miles and hours driving, my priorities were smallest size (for easier downtown navigation and to fit in standard parking spots), driving comfort, gas mileage, reliability and service, and then the amenities such as the bed, electrical systems, etc.. I found that all new Class B RVs seem to be built on either the Mercedes Sprinter, Ram Promaster, or Ford Transit cargo/passenger van chassis. I found that we'd probably be looking at something from Roadtrek, Winnebago, Pleasure-Way, Coachmen, or Hymer. We decided we wanted the shortest possible van, which meant we were only looking at the 19-20 feet models. That eliminated the Transit chassis entirely. It looked like we'd have quite a few different options for a Promaster, but only a couple for a Sprinter. I had all the dimensions, specs, and details for the various models in my Smartsheet, and used that to narrow in on the few most promising options.

Next step was to drive them to determine whether we thought the Sprinter would be worth the extra cost and the extra hassle of having a diesel engine. It was. In fact it wasn't even close. The problem really came down to my height. I'm 6' 3", and I just couldn't get comfortable in the Promaster, the seat wouldn't go back far enough for me to be able to move my legs at all, and I couldn't envision being comfortable for an hour long drive, let alone a 6 hour one. The Sprinter meanwhile was very comfortable. Given there were only a couple of sub-20-foot Sprinter-based RVs out there, it seemed like it would be pretty simple from there. It was anything but.
The problems started popping up right away. The Roadtrek model we drove was nice, but it didn't have the safety features (blind-spot warning, lane keeping assist and collision avoidance) that it should have had for reasons I would come to discover much later. I started looking at listings from other dealers and found that none of the nearby ones had the model that did include those features. And we learned that we were already too late to order a new model and have confidence that we'd have it by mid-April. We did however find a used Pleasure-Way Ascent in Fife that looked good. It was a 2017 with just over 5,000 miles on it. It seemed perfect. It had all the safety features we wanted, it was in great condition with the chassis still under warranty so we could get service at any Mercedes dealer. We thought we'd found our RV. Unfortunately Johnson RV had other ideas when I went down to negotiate a price for it. I had seen the price the original owners had paid for it 18 months previously, as they had left the paperwork in the RV with all the manuals. I was sure that if I was prepared to go up to 90% of that price I'd be in good shape. Wrong. After the shortest, oddest negotiation for a new vehicle I've ever had, they came back with a bottom line price that was $7K over the previous sale price. Yes, they apparently believe that motor homes appreciate in value. Wow. Well so much for that. Now what? Back to a Roadtrek? I had been reading in a couple of forums about Roadtrek being in some financial trouble. Another company, Thor, was in the process of acquiring Roadtrek's parent company Hymer NA, when their auditors discovered some financial irregularities. The future of that company was in question, and a bunch of stories came out about some of their recent troubles. Remember those safety features that I wanted but weren't available on the Roadtrek at Poulsbo? Well it seems that was a cost-cutting measure by Roadtrek, they started using the stripped-down Sprinter chassis to save a bit on costs. I was nervous about buying a recent model from a company that might not be in business by the time we hit the road. What I really wanted was a Pleasure-Way Ascent, which seemed to have the highest build quality, all the features we wanted, and no signs that the company was in any trouble.
Of course, there were no new Ascents on any RV dealer lots anywhere in the Western US. We knew there weren't any in Washington, but flying down to California or even as far as Utah or Nevada seemed feasible. But of course it couldn't be that simple. They were just about ready to start delivering the new model year, and had a back log of orders to fill before they could deliver any to dealers for inventory, and we were of course to late to get an order in ourselves. Well after a lot of back and forth and no small amount of angst, I ended up finding one of the last few new Ascents at a dealer in Columbus Ohio. I flew out to inspect it and take delivery, and it was shipped to Kirkland on a flatbed truck. Between the time I agreed on a sales and delivery price with them and getting on a plane a week later, the news came that Roadtrek had filed for bankruptcy. Feel like we dodged a bullet there. Oh, and our new Ascent cost me just $6,000 more than Johnson wants for their two-year-old used one. A used model that I see is still on their lot 5 months later.
It was quite a saga. I enjoyed the early research, but I really wish we had started a few months earlier. Had I realized that inventory for RVs is nothing like it is for cars (fewer dealers with fewer models in stock), and that you need at least a 5-6 month lead time for ordering from the manufacturer, I would have started the process in October instead of late December. Fortunately all's well that end's well. We have the model we wanted with all of the features we wanted. We'd have preferred the silver color to the off-white, but that's the only compromise we ended up having to make. The people at RCD RV in Columbus were really great and offered a very fair discount and covered the cost of my flight out, and we haven't found any issues so far. I'll post more pictures and do a write-up of our little RV in another post.





Comments